14 digital input / output port: RX, TX, D2 ~ D13,8 analog input port: A0 ~ A7A pair of TTL level serial port transceiver: RX / TX6 PWM port: D3, D5, D6, D9, D10, D11Use For Atmel Atmega328P-AU microcontrollerSupport serial download

MCU: ATmega328Digital I/O: 14 (6 PWM)Analog Input: 8Flash Memory: 32 KB of which 2 KB used by bootloaderSRAM: 2 KBEEPROM: 1 KBClock Speed: 16 MHz

USB CH340 ICMicrocontroller:ATmega328POperating Voltage:5VDigital I/O Pins 14 (of which 6 provide PWM output)PWM Digital I/O Pins:6Analog Input Pins:6

The Arduino Mini is a small microcontroller board intended for use on breadboards and when space is at a premium. The revision 05 has a new package for the ATmega328 (datasheet), which enables all components to be on the top of the board.It also has an onboard reset button.The 05 version has the same pin configuration as revision 04.

USB CH340 ICMicrocontroller:ATmega328POperating Voltage:5VDigital I/O Pins 14 (of which 6 provide PWM output)PWM Digital I/O Pins:6Analog Input Pins:6DC Current per I/O Pin:20 mADC Current for 3.3V Pin:50 mAFlash Memory: 32 KB (ATmega328P), of which 0.5 KB used by bootloaderSRAM:2 KB (ATmega328P)EEPROM: 1 KB (ATmega328P)Clock Speed:16 MHz

The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller.

Ethernet Shield, based on the Wiznet W5100 ChipSupported by the official Ethernet Library

The Arduino Uno Rev3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.

Expansion board; adaptor; Ethernet; 3.3VDC

Atmel Atmega2560 microcontrollerDigital I/O ports: 54Analog I/O ports: 16

Στην φωτογραφία βλέπουμε το υλικό μονταρισμένοαποτελείτε από πλακέτα και υλικά (θα πρέπει να μονταριστεί)χρησιμοποιεί mikrocontroller (το οποίο είναι προγραμματισμένο έτοιμο)Δέχετε τετραψήφιο κωδικό για on-off του ρελλεμπορεί να πάρει μέχρι 30 διαφορετικούς κωδικούςμπορεί να προγραμματιστεί για όπλιση - αφόπλιση του ρελλεμε χρονικό όριο εως 255 δευτερόλεπταή για κωδικό και όπλιση και κωδικό και αφόπλισηή κωδικό όπλιση για 2 δευτερόλεπτα και αυτόματη αφόπλισητροφοδοσία 12 βολτ 1 Αμπερκατάλληλο για εκπαιδευτική χρήση

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

Υπολογιστής σε μέγεθος πιστωτικής κάρτας.
Το Raspberry Pi 3 προσφέρει επεξεργαστή 1.4GHz 64-Bit και μνήμη 1GB,
διαθέτει wireless LAN 2.4GHz / 5GHz και νέο Bluetooth 4.2/BLE.