- Ιουλιανού 87 Αθήνα
- 210 82 14 224
- 698 330 7 220
- email : email@example.com
Arduino Uno rev3 (original) – K042
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
12 σε απόθεμα
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter.”Uno” means one in Italian and is named to mark the upcoming release of Arduino 1.0.
The Uno and version 1.0 will be the reference versions of Arduno, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB of which 0.5 KB used by bootloader
SRAM 2 KB
EEPROM 1 KB
Clock Speed 16 MHz
Arduino Pro Mini 3.3V/8M ATMEGA328 (Compatible) – K034
€9,00Προσθήκη στο καλάθι
14 digital input / output port: RX, TX, D2 ~ D13,
8 analog input port: A0 ~ A7
A pair of TTL level serial port transceiver: RX / TX
6 PWM port: D3, D5, D6, D9, D10, D11
Use For Atmel Atmega328P-AU microcontroller
Support serial download
Arduino mega 2560 (original) – K041
€46,00Προσθήκη στο καλάθι
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.